7 Easy Secrets To Totally Intoxicating Your Repairs To Upvc Windows
7 Easy Secrets To Totally Intoxicating Your Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.
It is important to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also improve energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good repair.
For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the frame of the previous one easily. However when you have double pane windows that are anchored by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this instance you'll need locate some plastic spacers to help the new pane to fit properly into the frame of the window.
Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.
Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap between the door and the window is significant, you may prefer a security screen that also includes windows. This will give you the best of both.
2. Sagging
Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a number of problems such as sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from worsening.
To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows so you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the size of the window, tighten the screws to hold them in the right position.
If you are unable to move the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows remain watertight and draught-proof.
UPVC handles can also loosen. This is typically caused by screws that have loosened over time, but it can also be due to the handle mechanism getting worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to shut the window and perform an initial fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into position.
3. Water Leaks
If you're waking up to wet floors and damp walls each time it rains it is important that you take action. Water leaks from windows can not only cause destruction of your home's structure but also hinder your efforts to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.
This is an easy fix that can be done by any DIYer who is competent. Based on the severity of the issue the caulking used previously may need to be removed before a new layer of caulk is applied. When it comes to uPVC repair, you should avoid over-caulking. This will make your window harder to clean and reduce its energy efficiency.
Make sure that the drainage holes have no debris inside them and that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window.
Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can quickly spread throughout the house.
If the leakage occurs between the double-glazed glass, it is more likely the problem is with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or loose and open with a breeze it could be the hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.
Like all mechanical parts, hinges can be damaged over time. Changing a window hinge is essentially a very simple procedure, but it is easier to do with someone else to help hold the frame up.
It is also important repairmywindowsanddoors.co.uk to ensure that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.
The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. This can often be resolved by sending us a photograph through our website and we will be pleased to offer you advice.
It is also essential to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by different things. The hinges can also become unbalanced due to wear, creating gaps between the frame and sash. They can be repaired by giving them good clean, but in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, may also become misaligned, again it is feasible to give them a clean but in certain cases, it may be necessary to have these replaced.
The second most frequent reason for draughts are the window seals. They are prone to wear or damaged over time and will allow air to escape through these gaps. Installing high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease draughts.
One of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes that are filled with some sort of filler and can be placed on top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!
Your windows made of upvc will keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it is more cost-effective to simply replace them instead of fixing them. If you have any problems with your upvc window you should consult a professional as soon as possible.